Yanaka Jacket in Scrappy Remnants

I've been wanting to make a Yanaka jacket for a while! I love the silhouette and the relaxed design; cropped or shorter jackets usually look best on me so I knew I'd have to make this one. I considered making a quilted jacket, but realized that a simpler print mixing version would suit me better. This project was made for the Liesl & Co. Ambassador Circle but was also inspired by the PatternReview Print Mixing Contest that ran in January (and if you're a PR Member, you can still pop over and vote for my jacket until Feb 10 if you'd like!) It will be shared on the Liesl & Co blog shortly as well!

This is an ideal pattern for print mixing or colour blocking, as there is a centre back seam, sleeve gussets and facings that can show if you fold the collar down. Lots of opportunity to use smaller pieces and show off those pretty leftover bits. And I have lots of pretty leftover bits! I use a lot of cottons and linens in my sewing so I got out my scrap bins and pulled out some of the larger remnants. I trialled a bunch of different combinations but finally decided on five floral prints that all fall within the same colour tones and scale. One of the prints (on the sleeve gusset) was just a cotton from my stash, but the other four prints werer remnants from other projects -- Butterick 6725, Butterick 6655 , the Itch to Stitch Celeste, and the Sew Different Harmon Top. 

I came up with a placement plan, but these fabrics were all fairly light/fluid. The Yanaka pattern recommends a medium to heavier weight fabric to support its shape, so I interfaced all the pieces with a medium weight fusible interfacing before starting construction. I knew that the standing collar, the front points and that wee back notch needed to be sharp, not floppy. Interfacing them prior to construction allowed me to use these particular scraps.

I didn't make many changes to the actual pattern. But there were a couple. I shortened the sleeves, actually by a little too much. In the end I didn't want to take any length out with a wide hem, so I made a 2" wide sleeve facing out of the cotton I used for the sleeve gussets (these were non-interfaced) and hemmed the sleeves that way. This also gave me a clear surface to stitch the lining on. I've added back some of the length to the sleeve pattern so I don't make this mistake again.

And I did also make a lining for this -- the jacket pattern is unlined, but with all my interfaced innards I wanted it all covered up nicely. Because of this I finished all my seams with a quick pass of the pinking shears since they'd end up invisible anyway.  I added in a 1/2" centre back pleat to give more movement room, and the lining was also a scrap!

The most notable change I DIDN'T make was that I did not shorten the body of the jacket at all. I almost always shorten above the waist but this time I liked the finished length and didn't want this to be too cropped, so left it as drafted. I really like how it turned out! It's really comfortable and the fit is great. I love the chance this pattern offered to use some of my beautiful print scraps to make a one-of-a-kind jacket. The lines of the design are just made for it!