This is actually a fairly easy project, based on this genius tutorial by Portia Lawrie at the Makery. I changed it just a bit.
For my version I used a fat quarter of Japanese cotton as my backing, just folding it in half to get the size I wanted ( the fatter rather than skinny fold). I fused on some medium weight interfacing to one half of it to give it a bit more body, and then stitched around the outer edges and turned it right side out. After pressing it again I topstitched the edges, closing up the turning gap that way.
I cut 4 strips of cream felt at 1.5" to make the needle pockets, dividing them into 4 sections with stitching. I added one 1.75" strip of grey felt at the bottom and made 3 pockets in it.
The grey section is for the packet that I am currently using, and since I have 3 machines I made 3 pockets. I am going to add an initial to each one to help differentiate between my Janome, Kenmore, & Featherweight.
The cream pockets are for all the needle packets that I have or am likely to use soon. As I use one, the little container goes down into the grey section, and when I am done, the container goes back up into a cream storage pocket and if the needle is still usable it gets stuck into the front of the appropriate needle pocket for later use.
I think this system will help me keep much better track of my machine needles without having to resort to a magnifying glass to see the marks on a needle.
Do you have a good system for this? I have always found organization difficult so am glad to find something that feels easy to manage!
This is such a great idea! Thanks for sharing.
ReplyDeleteI'm glad you like it! When I first saw the tutorial I thought it was so clever :)
DeleteI always use needles from left to right in a packet. This way I am sure I am reusing the same needle if I thought last time that use was light enough to give it another round. And if I need a new needle for sure, I just use the 2nd one from the left to be sure if its pristine state.
ReplyDeleteLove your idea, thank you, I feel a project coming on..
That is a good idea too - I just keep forgetting which needle I've put into my machine! I hope this organizer solves that issue.
DeleteNow THAT is a nice method. I did make a felt needle holder years ago, and then let it fizzle...this looks more sensible. I do use needles until they break or start 'thwocking' when punching through fabric [I know what I mean lol] but I have odd packets in several different locations. Thanks for sharing!
ReplyDeleteI know what you mean by that odd sound ;) I like to use my needles until they are DONE, and then use them for any paper piercing I need to do. This should help me keep better track of all my odd packets as well.
DeleteGreat idea, including using a skirt hanger to hold and hang it!
ReplyDeleteIt was quicker and easier than trying to stitch on some hangers or add grommets :)
DeleteNeedles are important, and when they all float in their packets in a drawer there is no way of keeping track of what we are using. I think I would need to make a roll up version of this, as I don't have much space. But the concept of this is great. I will have a think how I could use it.
ReplyDeleteI think you could figure out a way to make a little booklet of sorts that could be size appropriate for your space. Just move the current pack to the first "page" and have all the rest on their own pages.
Delete